Fiber Optic video, RS
data & transmission - Fiber Optic CCTV - Fiber video transfer
Fiber optik CCTV sistemleri ; Her türlü video, analog kamera görüntüsünü, fiber optik kablo üzerinden
uzak noktaya taşınmasını sağlar.Otomatik kazanç kontrolü , kısa
devre korumalı elektronik yapısı ile hatasız profesyonel renkli görüntü
transferi için kullanılmaktadır.Optik ayar ve
network tanımlaması gerektirmez.Alıcı ve verici tx-rx ünitesi
sayesinde sorunsuz görüntü transferi sağlar.
| Complete SMD components, 18 inches duralumin chassis, and standalone case |
| Support hot plug and play, switch power supply |
| Optical interface: FC,ST, SC (optional) |
| Without EMI, RFI and ground loop |
| 8BIT and 10BIT quantification level is optional |
| Abundant signal interface, such as video, data, audio, telephone, Ethernet, binary input/output and talkback |
| Perfect signal indicator for optical, video, data, audio, telephone, Ethernet, binary input/output and power supply |
| Excellent data anti-thunder solution |
| 1310nm and 1550nm optional and max optical link loss is 30dB |
| Standalone and module two types |
| Standalone video multiplexer (1U chassis and standalone multiplexer), additional chassis is unnecessary |
| Module type equipped with 18 slots chassis |
| Opitcal: | |
| Output/Input Wavelength |  1310nm&1470nm~1610nm |
 |
|
| Output Power | -8~3dBm |
|
|
| Optic fiber |
50/125u
multimode£¬62.5/125u multimode£¬9/125u single mode
|
|
|
| Rx sensitivity |
-30dBm
|
|
|
| Optical interface |
FC¡¢ST¡¢SC£¨optional£©
|
|
|
| Video: | |
|
|
| Number of Channels | 4
/ 8 /16 |
|
|
| Input/output impedance | BNC
75¦¸ (unbalance) |
|
|
| Standard video input/output voltage | 2.0Vp-p |
|
|
| Video voltage range | 0.6~2.0Vp-p |
|
|
| Differential Gain | <
¡À1% |
|
|
| Differential Phase | <
¡À1 |
|
|
| S/N ratio | >60dB(weighting£©£¨8
bit£© >70dB(weighting£©£¨10
bit£© |
|
|
| Connector | BNC |
|
|
| Audio (option) | |
|
|
| Audio Input/output Impedance | 600ohm(unbalance) |
|
|
| Max input/output voltage | 2.0Vp-p |
|
|
| Frequency Response | 10~20kHz |
|
|
| Total Harmonic Distortion | <0.05% |
|
|
| S/N ratio | >95dB(weighting) |
|
|
| Connector | Standard
terminal lead |
|
|
| Data: | |
|
|
| Data protocol | RS232¡¢RS422¡¢RS485¡¢Manchester£¬BIPHASE
data |
|
|
| Data rate |
0~300kbps |
|
|
| Error rate | 10e-9 |
|
|
| Connector | Standard
terminal lead |
|
|
| Ethernet: | |
|
|
| Work mode | Full
duplex/half duplex |
|
|
| Network speed | 10/100Mbps£¨AUTO£© |
|
|
| connection terminal | RJ45 |
|
|
| Telephone: | |
|
|
| Connector | Standard
RJ11 |
|
|
| Phonetic bandwidth | 8KHz |
 |
|
| Work mode | Point
to point hot line, program controlling switch/extension mode |
|
|
| Distortion | <1% |
|
|
| S/N ratio | >95dB |
|
|
| Binary input/Output: | |
|
|
| Connector | Terminal
lead |
|
|
| Signal input |
alarm, Binary input, support TTL¡¢RS-232/422/485 or passive
switch button |
|
|
| Signal output | Arbitrary
alarm, Binary output, support TTL¡¢RS-232/422/485 or relay
output |
|
|
| Connector | Standard
terminal lead |
|
|
| Environmental | |
|
|
| Work voltage | Chassis
supply electricity(170V~240V AC auto-adaptation) |
|
|
| Work temperature | -35¡æ¡«+70¡æ |
|
|
| Humidity | 0~95%non-condensing |
|
|
| Mechanical | |
|
|
| Standalone Dimension£¨H*W*D£© | 130mm
*152mm *28.8mm |
|
|
| Ordering information | |
|
|
| OM610-4V¡ü1D¡ıWT/R | 4
ch forward video + 1 ch reverse data |
 |
||||||||||||||||||||||||
|
Model Specification of Video Optical Tx/Rx: |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|